Today we will introduce a color powder mixer
Based on the wear and impact of materials between high-speed rotating blades and inner walls, pigments or pigment particles are dispersed and crushed into the required fine particles.
Equipment features: The parts in contact with the raw materials are mostly made of stainless steel, which meets hygiene standards. Some powder printers also have automatic digital display timing function, which is easy to operate and can stir the color powder evenly in a short time, with high efficiency.
The color powder mixer is mainly used for stirring and mixing various types of dry powder, as well as for dispersing powder clumps. Chemical industries such as toner, pigments, fertilizers, ceramic powder, carbon black, graphite powder, rubber powder, plastics, etc. Our company has now meticulously developed 10kg powder applicators, 20kg powder applicators, 30kg powder applicators, 50kg powder applicators, and 100kg powder applicators.
Introduction to high-speed mixer products:
Adopting the design concept of mirror stainless steel powder mixing barrel+welder+new high-speed Usage of the toner mixer: Turn on the power of the pigment mixer, loosen the chassis under the toner barrel to the left, remove the toner barrel, load various toner pigment formulas, cover the lid, install the barrel on the chassis, rotate the pigment mixer chassis to the right, align the mixing shaft with the transmission slot and tighten it, and adjust the time according to the requirements. Press the start button to start mixing and dispersing, and the time will automatically stop.
The small pulverizer is composed of a stainless steel upper cover and lower body pulverization chamber, which is closed with screw fasteners. The high-speed operation of the upright motor drives the horizontally installed crushing blades to perform impact and shear crushing on the material. Due to being stirred in a closed space, the crushing effect of crushed objects is relatively uniform and suitable for dry materials. The machine has a swinging design, which facilitates the dumping and cleaning of materials.
Instructions for use of high-speed mixer:
1. This machine utilizes the principle of mandatory mixing to pour materials into a barrel and achieve uniform mixing under high-speed stirring.
2. After the installation of this machine is completed, it is necessary to test the machine before initial use, check the direction of motor operation, whether there is any abnormal noise during machine operation, and whether the operation is smooth.
3. If everything is normal during the empty machine trial run, the work before feeding can proceed
4. Clean the machine to ensure that there are no impurities contaminating the raw materials
5. Confirm whether the inlet door on the barrel is properly sealed and whether the pressure port is securely fastened.
