Today we will talk about the purpose of a dry powder mixer
The horizontal mixer is suitable for uniformly mixing powders and powder particles such as flour, starch, white sugar, salt, seasonings, feed, fertilizers, ceramic powder, cement, dye coatings, diatomaceous earth, quartz sand, etc. It has wide applicability and good mixing uniformity.
The working principle of a horizontal mixer: The working principle of a horizontal mixer is to arrange double-layer spiral blades on the transmission spindle, inside The small spiral belt transports the material outward, while the large spiral belt transports the material inward Under the convective motion of the double helix, the material forms a low power high An efficient mixed environment. The inner and outer diameter screws installed on the mixing shaft drive the material inside the barrel, allowing the mixer to perform a range of flipping processes on the material inside the barrel. When the mixing device is working, the inner screw drives the material near the axis to rotate around the axis, pushing it from the inside to both sides in the axial direction. The outer screw drives the material near the barrel wall to rotate around the axis, pushing it from both sides to the inside in the axial direction, so that the mixed material can be evenly mixed in a short time.
Introduction and advantages of horizontal mixer:
1. The materials used to make horizontal mixers include different types of stainless steel such as carbon steel, SUS201, SUS304, SUS316L, etc. The material contact surface is made of stainless steel. The whole machine can also be customized with stainless steel material according to customer requirements;
2. The mixing capacity of the horizontal mixer is available in multiple models, ranging from 200 to 10000 liters, for customers to customize and choose from. The interior of the horizontal mixer barrel is polished smooth, and the blade mixing design is reasonable. Each batch can be mixed evenly in 5-10 minutes;
3. The mixing blade of the horizontal mixer is a fully stainless steel central shaft and single or double "S" - shaped blade, which can mix the material quickly and evenly; The discharge port of the horizontal mixer has a blade type, wall mounted, valve, manual, automatic (pneumatic, electric) waterproof, dust-proof and leak proof.
4. The horizontal mixer motor adopts high-quality copper wire motor. Cycloid pinwheel reducer, with long service life and low noise; Or cylindrical gear reducer, with high torque. The transmission part is connected by an industrial V-belt, and the replacement of accessories is convenient and fast.
