Today, talk about which industries are popular with horizontal mixers
Horizontal mixing equipment is highly favored by the following industries due to its high mixing uniformity and wide applicability:
-Chemical industry: used for stirring and mixing materials such as coatings, inks, adhesives, etc.
-Food industry: suitable for mixing in the production process of sauces, seasonings, dairy products, etc.
-Building materials industry: used for mixing and preparing building materials such as concrete, putty powder, mortar, etc.
-Plastic/rubber industry: suitable for mixed plasticization of polymer materials and additives.
-Metallurgical/mining industry: used for mixing operations of mineral slurry and mineral processing reagents.
The horizontal mixer is mainly used for the mixing of two or more types of materials, pre mixed materials, which can achieve rapid and uniform mixing in a short period of time. The shaft seals at both ends adopt special seals, with no leakage of powder liquid. The replacement cost of sealing consumables is low, and it is easy to replace. Therefore, it is a widely used, adaptable, and effective high-efficiency mixing equipment.
The working principle of a horizontal mixer is to arrange double-layer spiral blades on the transmission spindle, with internal and external spirals (small spiral belts) conveying materials to the outside, and external spirals (large spiral belts) pushing materials inward. Under the convective motion of the double spiral belts, the materials form a low power and high efficiency mixed environment. The inner and outer diameter screws installed on the mixing shaft drive the material inside the barrel, causing the agitator to flip the material within a certain range inside the barrel. When the mixing device is working, the inner screw drives the material near the axis to rotate axially, pushing it from the inside to both sides. The outer screw drives the material near the barrel wall to rotate axially, pushing it from both sides to the inside, allowing the mixed material to mix evenly in a short period of time.
The characteristics of a horizontal mixer:
1. The horizontal mixer has high mixing uniformity and minimal residue, making it suitable for mixing two or more materials.
2. The horizontal mixer is equipped with a reducer, which has the characteristics of low noise, low energy consumption, high efficiency, and durability.
3. Adopting an "S" type single or double spiral belt, the material is mixed quickly, evenly, and without any storage.
4. The top cover is opened, with a beautiful and elegant appearance, and there is no dust flying during operation, without wasting materials.
