Today, we will introduce an emulsifying equipment suitable for chemical plants
Emulsifying tanks use high-speed stirring and shearing mechanisms to dissolve one or more materials (such as water-soluble solid phases, liquid phases, or gel like substances) in another liquid phase, forming a relatively stable emulsion.
The meaning of a mixing tank is to stir, mix, blend, and homogenize materials. Stainless steel mixing tanks can be designed with standardized and user-friendly structures and configurations according to the requirements of production processes. The mixing tank can achieve feed control, discharge control, mixing control, and other manual and automatic controls during the mixing process.
The materials used for the mixing tank body, mixing tank cover, mixer, shaft seal, etc. can be made of carbon steel or stainless steel according to different process requirements. The mixing tank body and mixing tank cover can be connected by flange sealing or welding. The mixing tank body and mixing tank
Introduction to Mixing Tank:
1. The mixing tank body, mixing tank cover, agitator, shaft seal and other materials can be made of carbon steel or stainless steel according to different process requirements.
2. The mixing tank body and the mixing tank cover can be connected by flange sealing or welding.
3. The mixing tank body and mixing tank cover can be equipped with process pipe holes for feeding, discharging, observation, temperature measurement, pressure measurement, steam fractionation, safety venting, etc. according to process requirements.
4. The upper part of the mixing tank cover is equipped with a transmission device (motor or reducer), which drives the mixer inside the mixing tank through the transmission shaft.
5. The shaft seal device can adopt various forms such as mechanical seal, packing, labyrinth seal, etc. (determined according to user needs).
6. Due to different production process requirements of users, mixers can be configured in various forms such as slurry, anchor, frame, and spiral.
7. If there are other requirements, please contact our factory to design and manufacture separately.
ver can be equipped with process pipe holes for feeding, discharging, observation, temperature measurement, pressure measurement, steam distillation, safety venting, etc. according to process requirements. The upper part of the mixing tank cover is equipped with a transmission device (motor or reducer), which drives the mixer inside the mixing tank through the transmission shaft. The shaft seal device can adopt various forms such as machine seal, packing, labyrinth seal, etc. (determined according to user needs). Due to different production process requirements of users, the mixer can be configured in various forms such as slurry, anchor, frame, spiral, etc. If there are any other requirements, please contact our factory for separate design and production.