Hot Sale Food Grade Stainless Steel Colloid Mill, Fine Grinding & Customizable
The stainless steel colloid mill is mostly made of food-grade 201/304/316 stainless steel. It has a circulating grinding structure and is suitable for processing materials such as fruit juice, soy milk, sauces, cosmetics, and chemicals. The discharge is fine. It supports variable frequency speed control and can be customized non-standardly. It is easy to clean and is widely used in the food, cosmetics, and fine chemical industries.
The colloid mill is a type of wet ultra-micro grinding and homogenization equipment. It relies on the motor to drive the rotor to rotate at high speed. A variable small gap is formed between the rotor and the corresponding stator. The material enters the gap between the moving and stationary grinding discs through the feed port. Under the effects of high-speed shearing, friction, impact, and turbulence, the material is continuously crushed, dispersed, emulsified, and homogenized, completing the fine processing. The processed material is discharged from the outlet. The gap between the grinding discs can be adjusted, and a cooling jacket is used for temperature control to meet the processing requirements for different fineness and temperature-sensitive materials.
- The stator and rotor are the core grinding components. The gap can be adjusted to control the fineness of the material;
- The cooling jacket can be filled with cooling water to control the grinding temperature and prevent the material from deteriorating due to high temperature;
- The regulating mechanism is used to precisely adjust the gap between the grinding disc, and is suitable for different fineness requirements.
Operation method of colloid mill:
1. Check the appearance of the colloid mill to see if there are any deformation, obvious scratches or residual defects on the funnel, circulation pipe, motor, and base of the colloid mill.
2. Connect the funnel, circulation pipe, discharge port, etc. of the colloid mill and check for any loose or loose connections.
3. Adjust the clearance between the grinding discs of the colloid mill, rotate the dial of the colloid mill by hand, and check if the dial can adjust the fineness of the grinding head normally.
4. Start the colloid mill, use water as the medium, and test the machine to see if the colloid mill can operate normally.
5. Open the discharge valve and discharge the water from the discharge port for debugging.
Colloid mill is a semi-wet material processing equipment, mainly composed of grinding head, base and motor.Colloid mill of dynamic and static grinding discs and mechanical seals in the core part of the machine is the key part of the colloid mill.
