How to choose materials for horizontal mixers in various industries
Horizontal mixers are suitable for mixing various dry powders, such as starch, flour, chocolate powder, food seasonings, calcium powder, additives, metal powder, etc. They are widely used in industries such as food, chemical, plastic, and daily chemical.
The material of a horizontal mixer is mainly divided into two parts: the material contact part and the outer part of the frame; The material contact surface can be selected from carbon steel, 201 stainless steel, 304 stainless steel, 316L stainless steel, etc; The rack can be made of carbon steel sprayed with anti rust paint, 201 stainless steel, and 304 stainless steel.
The horizontal mixer is mainly used for the mixing of two or more types of materials, pre mixed materials, which can achieve rapid and uniform mixing in a short period of time. The shaft seals at both ends adopt special seals, with no leakage of powder liquid. The replacement cost of sealing consumables is low, and it is easy to replace. Therefore, it is a widely used, adaptable, and effective high-efficiency mixing equipment.
The horizontal screw belt mixer is a horizontal cylinder structure, with positive and negative screw belt mixing blades on the internal mixing shaft. The main shaft drives the screw belt to rotate synchronously, with the inner screw belt conveying the material outward and the outer screw belt conveying the material inward. The material flows back and forth and rolls, achieving a uniform mixing effect.
Features of stainless steel horizontal mixer:
1. The material barrel and screw belt are made of stainless steel material, which is easy to clean.
2. Adopting a reducer for deceleration, wear-resistant and durable, with long service life and low noise.
3. Use "S" type single or double screw belts to mix materials quickly, evenly, and without any storage.
4. The top cover is opened, with a beautiful and elegant appearance, and there is no dust flying during operation, without wasting materials.
Horizontal mixer discharge outlet discharge method:
Wall mounted (square) discharge ports are generally available for 100-1000KG. Advantages: Mixing without dead corners.
This type of discharge outlet can be selected for both circular and blade type models. Specification diameter 133-159-219-273. Disadvantage: There is a small amount of material that cannot be stirred.
Butterfly valve type (circular) is suitable for preventing spillage of fine powder or some liquid materials
Butterfly valves can be divided into three switching modes: manual, pneumatic, and electric (the latter two can be automatically controlled)
The gate valve (square) is driven by a motor to horizontally push and pull the lifting reducer to switch (suitable for automation control)
