Introduction of vertical screw conveyor products
Vertical screw conveyor belongs to special screw conveyor. The casing of the former is a round tube, and the centrifugal force generated by the spiral driving the material to rotate at a high speed pushes the material to the tube wall, and then is pushed upward by the blades. Its lifting height is within 20 meters. The casing of the latter is also a round tube, and the tube is equipped with blades along the inner helix. The casing is supported on the rollers for low-speed rotation, the material moves forward along the blade, and the loading and unloading are carried out at both ends. It can transport materials with a slight incline without jamming.
The diameter ranges from 100mm to 1250mm, with a total of 12 specifications, which are divided into two types: single drive and double drive. The maximum length of the single drive screw machine can reach 40m (super large 30m). The length can reach 80m (extra-large 60m), the length of the screw machine is every 0.5m, and it can be selected according to the needs. The head bearing and tail bearing of the screw machine are placed outside the shell to reduce the intrusion of dust into the bearing chamber and improve the screw machine. Service life of key components. The intermediate hanging bearing adopts two structures of rolling and sliding interchangeable, with low resistance, strong sealing and good wear resistance. The position of the inlet and outlet is flexible, and an electric outlet is added.
Widely used in various sectors of the national economy, such as building materials, metallurgy, chemical industry, electric power, coal, machinery, light industry, grain and food industries, suitable for conveying powdery, granular, small block materials, such as cement, coal powder, grain, Fertilizer, ash, sand, coke, etc. It is not suitable to convey materials that are easily deteriorated, viscous, and easy to agglomerate. The factory can design and manufacture special types of screw conveyors according to user needs.