Circular vibrating screen structure and working principle, do you know
The circular vibrating screen is named after its appearance. It is also called a circular vibrating screen. It is mainly used to separate solid powder, solid particles and liquids, and can classify materials according to the size of the particles. This article will explain the circular vibrating screen in detail for you. Vibrating screen structure and working principle.
Circular vibrating screen structure
Structure diagram of circular vibrating screen
The circular vibrating screen is composed of dust cover, screen frame, beam ring, screen mesh, punching plate, screen cleaning device, vibration motor, bottom barrel, vibrating plate and other parts.
Dust Cover: It confines the material and keeps the machine and surrounding environment free from dust.
Vibration motor: YZUL vertical vibration motor, power 0.18KW-4.0KW, it is this motor that causes horizontal, inclined and vertical three-dimensional motion, this motion will increase the speed of the material passing through the circular vibrating screen, in order to achieve this, The device is equipped with an unbalanced weight assembly.
Screen frame: The material thickness is 2.0mm~3.0mm, generally made of stainless steel, and carbon steel can also be selected, which limits the product to be processed to the required size and fineness.
Beam ring: It connects the bottom cone and the screen frame, the upper and lower screen frames, and also plays a role in preventing material leakage.
Screen mesh: maintain tension to make it easier for the material to move in the direction of vibration, commonly used 304 stainless steel woven mesh.
Punching plate: carry the screen, prolong the service life of the screen.
Net cleaning device: remove the blockages in the screen holes and increase the output, it is made of silicone and rubber bouncing balls, and an ultrasonic cleaning device (635 mesh) can also be selected.
The working principle of circular vibrating screen
Schematic diagram of circular vibrating screen
Feed the material to be separated through the feed port (the feed port on the top of the circular vibrating screen), make sure the cover plate, screen structure and base are fastened with snap rings, due to the unbalanced weight assembly, the vibration motor will be energized, causing vibration Movement, the screen will start to vibrate, and then, the material fed into the hopper will pass through the screen according to the particle size, the material larger than the screen size will stay on the screen surface and discharged from the coarse material discharge port, and the material smaller than the screen size will fall into In the lower layer, according to the design of the vibrating screen, you can configure 1-5 layers of screens to achieve particle size classification.
The above is the introduction of the structure and working principle of the vibrating screen, the circular vibrating screen can sort, separate or sieve the material to the required particle size for direct use or further processing, as you can see, the machine uses the vibrating motion to shake the screen, Thereby sieving out the required products, which are widely used in food processing, powder processing, feed processing, medicine, chemical industry and other industries.